Swiftech MCW60-T Ref: 436The MCW60-T is a fully assembled liquid-cooled thermoelectric (Peltier) solution, specifically designed for high-end graphics processor. Operating temperature ranges from ambient to freezing levels, depending on the heat load, and thermal capacity of the liquid cooling system.This unit is intended for advanced users and requires appropriate insulation to prevent the formation of condensation in sensitive areas of the graphics card. Whereas Swiftech provides gaskets, and specific installation instructions for such assembly, utilization of this device is at the sole risk of the user.The MCW60-T features a 188 Watts built-in thermoelectric module that can be operated from 12 to 19 Volts and yields sufficient cooling power to operate most high-end GPU's from freezing to well below ambient temperature levels.The following curves describe the device behavior at various voltages and heat loads. Coolant temperature was maintained at a 35°C constant temperature,a value representative of what is attainable with current high-end liquid cooling kits (such as our H20-220 Apex Ultra for exemple):DOES NOT INCLUDE RAMSINKS! » Click Here for More Info (Opens in New Window) Price: £69.70 exc VAT (£80.16 Including VAT at 15%)
Single PCI-Slot Backplate for 8800 Series Cards Ref: 52Replace the 8800GTX or 8800GTS Double Slot PCI bracket with a Single Slot PCI bracket. This will allow the use of any additional slots on either side of the video card. Price: £2.99 exc VAT (£3.44 Including VAT at 15%)
Swiftech MCW-Ramcool Ref: 554The MCW-Ramcool series are extreme duty waterblocks designed to fit nVidia's GeForce series VGA memory modules. The design concept is a standalone solution mechanically distinct from the GPU waterblock. For this reason the MCW-Ramcool waterblocks guarantee superior thermal joints with the memory modules compared to stock or to other aftermarket "monolithic" cooling solutions. This can translate into superior performance and overclockability of the memory modules.Please note, this product is designed for use with 1/4" ID Tubing and includes "F" Fittings. » Click Here for More Info (Opens in New Window) Price: £25.99 exc VAT (£29.89 Including VAT at 15%)
Swiftech Nvidia 7950GX2 Spacer kit *CLEARANCE* Ref: 89
Introduction
The 7950 GX2 Spacer kit is the brainchild of John Hillig AKA ViperJohn who approached us with this brilliant idea a few months ago, a concept that we bought into right away.
The GX2 spacer kit doubles the spacing between the 2 cards composing nVidia's 7950GX2 VGA, allowing users to install their existing MCW60 high-performance water-block, together with the MC14 BGA Ramsinks. This provides a low-cost high performance and low-noise cooling approach to the 7950GX2 SLI card.
Compatibility
The GX2 Spacer kit is only compatible with nVidia's Geforce 7950GX2, and does preclude quad-SLI configurations.
Features
The spacer kit is composed of a set of:
Clearance Items
