Pumps, Relays & Accessories

So which pump is the pump for me??
Ref: 49

Waterblock designs have evolved since the dawn of PC Watercooling. So too have radiator designs. Couple this with the shift in CPU design from small exposed die to large die underneath an IHS as seen in ALL the current generation processors, and we find that the performance difference from one pump to another reduces...

"With everyone using IHS capped CPU's nowadays, pumping power has less of an influence than it used to. From what I'm seeing, both in theory and actual testing (which are aligning nicely), you can pick almost any single pump with 2-5mH2O of pressure head, and 8-15lpm of flow-rate, and the temperature differences at the CPU at the end of the day will not vary by more than 0.3C between them. We are now in an era of relative flow-agnosticity with respect to pump choice. On bare-die CPU's, low-flow, small tubing, weak pumped w/c systems lost out. On modern IHS capped CPU's, the differences are now small enough to be counted as being insignificant by many." - Cathar over at XS

In answer to the question "which pump is for me?" the correct answer these days is that as long as it shifts between 8 & 15lpm then it's a case of "whatever floats yer boat..."

Suffice to say, every pump listed falls within this bracket of pumping performance.

O-CuK Antivibration Pump Mounting Kit
Ref: 285

Comprises 4x SoftRubber buffered double-M4 threaded parts with washers and nuts. Drill 4 holes in case base, mount the Antivibes, washer and nut from behind. Sit pump on top, washer and nut... done! Quick n' Easy!





Price: £5.95 exc VAT
(£6.84 Including VAT at 15%)

D-Tek DB-1 (aka DD-CPX1)
Ref: 289

The D-Tek DB1 / DD-CPX1 (same pump, different names) offers ultra low noise (20db), small size and is perfect for low restriction multiple block cooling loops or CPU only Cooling. This pump works very well paired with the high flow rates of our FuZion CPU block.

Features:

• Compact case
• Designed specifically for PC cooling
• Very low noise output (20db)
• Virtually no vibration output
• Mag drive ceramic bearing motor assembly
• Advanced rotor design provides quick priming
• Low power consumption and low heat output
• Brackets included for multiple mounting configurations
• G 1/4" Barb threading
• 1/2" or 3/8" Nickel plated Hi-Flo barbs
• Standard Motherboard 3-pin connection
• Can be submersed

Laing D5-Vario (1/2")
Ref: 397

Laing has just made the best pump better. The new D5-Vario boasts improved performance and quieter operations then the older D5.

• The annoying whine of the original D4 has now been SILENCED in the D5-Vario model (as well as in the new D5-Basic)
• Designed with a 50,000 hour mean time before failure (MTBF).
• Uses a 4 pin standard computer molex connector
• Use with 1/2" ID Tubing, or stretched 3/8" or 7/16" tubing.
• Compact size allows installation almost anywhere in the case
• Is powerful enought to supply multiple cooling block solutions (CPU/GPU/Chipsets)

• Dimensions: (WxLxH) 86mm x 95mm x 107mm
• Motor type: ellectronically commuted ball motor
• Rated voltage: 12 V DC direct current
• Power input: 23 W max @ 12v
• Admissible voltage area: 8 to 24 V
• Delivery height: at 12V: 3,7m
• max. Flow rate: ~5.8Gpm @ 0ft head.
• Delivery media: water, water-/glycol compounds
• Max. System temperature: 60° C
• Medium-affecting parts: stainless steel 1.4571,
• PPS-GF40, EPDM O-ring sealings,
• Aluminium oxide, hard carbon
• Connections: 2x 1/2" tubing connection

Laing DDC 3.2 - 18w (3/8")
Ref: 46

Wires straight to a molex.... no relay required, and features RPM monitoring.

This Danger Den DDC pump is one of the best 12V pumps on the market. It will run off of a standard computer power supply.

The pump electronically commutated wet rotor design results in only one moving part in the entire pump. A spherically suspended rotor/impeller rests on top of a ceramic ball and is driven magnetically, thereby eliminating the need for a shaft motor connection. The pump lasts longer, consumes less power and offers superior performance characteristics when compared to other pumps in its class.

To use with 1/2" tubing, you will need to order 2x 3/8" to 1/2" adapters, available HERE, or, use the Alphacool Plexitop for the DDC, which also improves performance, and can be found HERE

For reviews of this product see HERE

For Size and Noise info, see HERE



» Click Here for Manufacturer's Info
(Opens in New Window)

Price: £42.00 exc VAT
(£48.30 Including VAT at 15%)

Laing DDC 3.2 Ultra with Plexitop
Ref: 199

Laing DDC 3.2 18w & Plexitop...

Click HERE for performance testing and comparison of the DDC Ultra with AlphaCool PRO Top vs other variants

For Size and Noise info, see HERE

Planning a casemod around this pump? Get the DDC 3.2 Ultra Sketchup Component to make life easier!



» More Info...
(Opens in New Window)

Price: £52.00 exc VAT
(£59.80 Including VAT at 15%)

Laing DDC Plexi Top
Ref: 746

This attachment is designed so that you may exchange the conventional top cover of the Laing DDC pump with a new one, and thus G1/4" connectors can be used to allow tube sizes other than 3/8" ID. By means of the antivibration mounting studs also provided, the Laing can be mounted completely decoupled in any 3.5" bay, for example at the bottom side, by means of the standard uncouplings or even better, it can be installed in place of 80mm fans. Also for the attachment any position is possible, you may complete your projects using your fantasy. The attachment has also 5mm LED drillings for Case Modders. A further opening is provided for the optionally available water tank. The attachment can be converted into a complete water tank, also all the decouplings are available.

**Translation - converts DDC3.2 to DDC3.2 Ultra, and DDC3.1 to DDC3.1Pro



Technical data:

Dimensions (LxWxH): 80 x 80 x 25mm (without connection, without pump)
Weight: 180g
Material: Plexiglas GS
Mounting: 4x M4 thread, 8x decouplings
Connections: 3x G1/4 inch thread

Included in delivery:
1x DDC-Top, stainless steel screw M4x25, sealing plug G 1/4, mounting screws.

» More Info...
(Opens in New Window)

Price: £11.06 exc VAT
(£12.72 Including VAT at 15%)